BShields
Member
- Location
- Gloucester MA
- Occupation
- Electrician/Engineer
There is no info out there on how to read the Leviton 1000/2000 series meters anyone have any insight on this?
Leviton KWH meters
- Thread starter BShields
- Start date
ron
Senior Member
- Location
- New York, 40.7514,-73.9925
I believe the kWh shows up on the LCD display right on the meter enclosure. What do you want to read different than what is on the screen?
BShields
Member
- Location
- Gloucester MA
- Occupation
- Electrician/Engineer
it flashes back and forth not sure what numbers are the KW's
hmspe
Senior Member
- Location
- Temple, TX
- Occupation
- PE
From the installation manual:
Series 1000 and 2000 meters provide active energy measurements, which are
displayed on the LCD in 1 kWh resolution. These values are cumulative and
cannot be reset. When configured with the energy demand option, the meters provide
instantaneous readings on the integrated LCD. These values are displayed one at a
time, for six seconds each, as follows:
• Total Active Energy, in kWh (1 kWh resolution, cumulative, non-resettable)
• Instantaneous Demand, in Kilowatts (last 5 minute average, 1/100 kW resolution)
• Peak Demand: Kilowatts (15 minute rolling demand interval, 1/100 kW resolution)
A dot in the LCD aligns with an arrow on the display label to differentiate between
instantaneous and peak demand. After displaying peak demand and before displaying
total energy, the meter tests the LCD by activating all segments simultaneously for
one second.
Series 1000 and 2000 meters provide active energy measurements, which are
displayed on the LCD in 1 kWh resolution. These values are cumulative and
cannot be reset. When configured with the energy demand option, the meters provide
instantaneous readings on the integrated LCD. These values are displayed one at a
time, for six seconds each, as follows:
• Total Active Energy, in kWh (1 kWh resolution, cumulative, non-resettable)
• Instantaneous Demand, in Kilowatts (last 5 minute average, 1/100 kW resolution)
• Peak Demand: Kilowatts (15 minute rolling demand interval, 1/100 kW resolution)
A dot in the LCD aligns with an arrow on the display label to differentiate between
instantaneous and peak demand. After displaying peak demand and before displaying
total energy, the meter tests the LCD by activating all segments simultaneously for
one second.