Lighting contactor

Status
Not open for further replies.

mdshunk

Senior Member
Location
Right here.
People go to a lot of effort to PM when they could just post a question for themselves:

mrturk06 said:
hi how are you
i am dealing with ge cr460 mechanically held contactor and i am having prablem i have my 110v feed to contactor but it seems like I am misisng something (think its the coil side) the contactor wont work i am looking at the drowing i have here with me from ge lighting contactor its telin me p2 and p3 is my 110v feed p1 is not use p4 is for coil and p5 is? any help will be great thanks i know its very nonsens question for you but sorry

I would direct you to the manual, http://www.geindustrial.com/publibrary/checkout/Installation and Instruction|DEH-40460|PDF, particularly figure 6. It seems you might not be wiring a control switch right, or no control switch at all. If you're just switching coil power, you might need to jumper P2 and P3.
 
Status
Not open for further replies.
Top