Line reactor install

[toddro1971]

I need to install a couple of line reactors. Here are the specs for it. MET 3 phase reactor

What is the minimum size type one enclosure for this device. It will have 6 current carrying conductors (#10 thhn) and bond in and out. Basically I am going to mount it on unistrut and flex in and out on the load side of the disconnect.

 

[flick]

Re: Line reactor install

I'd check with the tech support folks of the manufacturer. They usually have specs available for the enclosures needed.

John

[ November 12, 2005, 10:32 PM: Message edited by: flick ]