Looking for a Crimper

[360Youth]

We need to have on hand a crimping tool for these open end terminals. Anybody know where we can find one? Thanks.

 

[wireguru]

what wire ga? here are a couple that wont break the bank
http://www.delcity.net/cartviewitem?item=990170&search=y
http://www.delcity.net/cartviewitem?item=990168&search=y

 

[360Youth]

what wire ga? here are a couple that wont break the bank
http://www.delcity.net/cartviewitem?item=990170&search=y
http://www.delcity.net/cartviewitem?item=990168&search=y

Looks like what we need. It is for 18-12 awg range. Thanks.

 

[cadpoint]

For all use play'n along @ da House, could U put a measuring device or a visual reference as to the object size, next time ! :roll:

 

[wireguru]

For all use play'n along @ da House, could U put a measuring device or a visual reference as to the object size, next time ! :roll:

true. that could be a 1.5" female disconnect for 4/0 :grin:

 

[360Youth]

For all use play'n along @ da House, could U put a measuring device or a visual reference as to the object size, next time ! :roll:

Things are always a bit more obvious to the poster. Maybe an addendum that states attachments are not to scale?? In retrospect I will try and avoid the assumptions. (Good luck with that on my part :grin Found one at the included links and bought today.