looking for ferrule for wire end

Status
Not open for further replies.
just the cowboy

just the cowboy

Inactive, Email Never Verified
Location
newburgh,ny
Just got a machine in from Germany.
The incoming supply terminal block only has a screw inside the connector not a pressure plate. I don't have a #1 wire ferrule or crimper, but I think I have seen a connector that has a setscrew like a lug for the wire end and a pin on the other end. Is there such an animal, searching now but can't find.
 
found what I needed

found what I needed

What I was thinking of was the connector that goes from wire to breaker, used when wire size won't fit under breaker because upsizing of wire.
 
SceneryDriver said:
I'm not sure that adapter would help; won't the setscrew on the adapter tear up the wire strands too? AD has a cheap crimper and die set:

http://www.automationdirect.com/adc...ping_Tools/Crimping_Pliers_-a-_Dies/DN-CT-HDL

http://www.automationdirect.com/adc...mping_Tools/Crimping_Pliers_-a-_Dies/DN-CT-D6



They have the ferrules you need as well:

http://www.automationdirect.com/adc..._Ferrules/Standard_Color_Single_Wire/BM-00518


SceneryDriver
Click to expand...

UL listed?

My understanding is that the only listed ferrules are made by Panduit and only go up to 1/0 because the new UL standard for ferrules only goes to 1/0.
 
Status
Not open for further replies.
Top