Low volt disconnect

Status
Not open for further replies.

Jim W in Tampa

Senior Member
Location
Tampa Florida
Is there any nec rules on equipment needing a disconnect on the 24 volt supply ? There is a disconnect for the 208/480 but they are concerned about the 24 volts is at remote location,low power just electronics no power.
 
Jim W in Tampa said:
Is there any nec rules on equipment needing a disconnect on the 24 volt supply ? There is a disconnect for the 208/480 but they are concerned about the 24 volts is at remote location,low power just electronics no power.
None !
 
Status
Not open for further replies.
Top