inspector141
Senior Member
- Location
- Westminster, MD
I'm preparing a code class for low voltage contractors and would like to gather some material from other NFPA codes besides NFPA 70. Such as NFPA 72, 101, etc. Any suggestions?
Low Voltage/Limited Energy Class
- Thread starter inspector141
- Start date
- Status
Yea how about stuff other than NFPA codes. Best practices of installation of cables etc.
70 is important, not just for article 725,760. Instructing them on proper bond/grounding. Article 800. Explaining the basics of chapter three wiring methods.
If you want more codes try 90A relating to duct smokes.
How about the ADA?
170 for symbols.
The applicable building code for your area (ie IBC)
70e as a reference just in case.
Don't for get ASME 17.1 for elevators.
70 is important, not just for article 725,760. Instructing them on proper bond/grounding. Article 800. Explaining the basics of chapter three wiring methods.
If you want more codes try 90A relating to duct smokes.
How about the ADA?
170 for symbols.
The applicable building code for your area (ie IBC)
70e as a reference just in case.
Don't for get ASME 17.1 for elevators.
- Location
- Bremerton, Washington
BICSI standards or its it the telecom association now?
- Status