LR fitting needed

[Danny89]

I am wondering if there is an LR conduit body on the market that allows pvc to be slid in and glued on the stub 90 side and the long side to have female threads so that IMC can be threaded into the LR?

Thanks


Sent from my iPhone using Tapatalk

 

[Danny89]

Here’s the situation…plan is to glue LR on to the pipes that come up from the slab and change to IMC on the right side of the LR as drawn…


Sent from my iPhone using Tapatalk

 

[James L]

Can't you use a rigid LR and put a PVC MTA on the side for the stub up?

 

[LarryFine]

I doubt it. You could use a PVC male adapter in a threaded LR.

Or glue on a PVC LR and glue in a short piece of PVC with a female adapter.

Do you have a preference between a metal and a PVC LR?

 

[Fred B]

SP Products make many adapters for use to transition from one to another type of raceways.

SP Products for Safer, Better, Faster Innovative Products for the Electrical Contractor

 

[Seven-Delta-FortyOne]

Just glue a female adapter into it.

Just about every generator I do has an LB, LL, or LR with flex attached.