Marina lighting

[bassone74]

What are the wiring methods for in stalling lighting on a pier or marina? Also how many boat slips constitute a marina? Thank Weston

 

[chris kennedy]

What are the wiring methods for in stalling lighting on a pier or marina?

555.13(A) Wiring Methods.

(1) General. Wiring methods of Chapter 3 shall be permitted where identified for use in wet locations.

Also how many boat slips constitute a marina? Thank Weston

2:smile:

555.1 Scope.

This article covers the installation of wiring and equipment in the areas comprising fixed or floating piers, wharves, docks, and other areas in marinas, boatyards, boat basins, boathouses, yacht clubs, boat condominiums, docking facilities associated with residential condominiums, any multiple docking facility, or similar occupancies, and facilities that are used, or intended for use, for the purpose of repair, berthing, launching, storage, or fueling of small craft and the moorage of floating buildings.
Private, noncommercial docking facilities constructed or occupied for the use of the owner or residents of the associated single-family dwelling are not covered by this article.

Welcome to the Forum.

 

[bassone74]

Thanks for the info Chris.

 

[e57]

I often see PVC run from boxes with the land side feeder in SO. In my city proper it would need to be RMC, but if it were me I would opt for PVC coated RMC, and stainless enclosures.