- Location
- New Jersey
- Occupation
- Journeyman Electrician (retired)
Anyone know if these are listed for MC-ap?
MC-ap Duplex Connector
- Thread starter infinity
- Start date
- Status
wwhitney
Senior Member
- Location
- Berkeley, CA
- Occupation
- Retired
The product page with a link to the spec sheet is here:
https://www.topaz-usa.com/bx-flex-mc/connectors-duplex/350
The spec sheet doesn't mention MCI-A, is the absence definitive?
Cheers, Wayne
https://www.topaz-usa.com/bx-flex-mc/connectors-duplex/350
The spec sheet doesn't mention MCI-A, is the absence definitive?
Cheers, Wayne
- Location
- New Jersey
- Occupation
- Journeyman Electrician (retired)
I looked at that too but didn't find the required MCI-A for MC-ap cable, short of contacting Topaz I was just wondering if someone had some further info.
Leespark57
Senior Member
- Location
- Boston, MA, USA
In the brochure for MC-AP, it says the following:
"Utilize the MC cable fittings marked “MCI-A” (MCAP cable). Fittings suitable for use with MCAP cable will contain an MCI-A marking on the fitting carton or package."
I would say no.
http://www.southwire.com/documents/MCAP_BrochureNEW.pdf
"Utilize the MC cable fittings marked “MCI-A” (MCAP cable). Fittings suitable for use with MCAP cable will contain an MCI-A marking on the fitting carton or package."
I would say no.
http://www.southwire.com/documents/MCAP_BrochureNEW.pdf
- Location
- Logan, Utah
According to the UL Database this specific MC connector is suitable for use with MC interlocking aluminum armor ground cable with a diameter of .600 only.
Chris
Chris
jumper
Senior Member
- Location
- 3 Hr 2 Min from Winged Horses
Yeah, I know the listing and such can be important, but I cannot say I see a whole lotta difference between those and some Arlington ones l looked up.
http://www.aifittings.com/catalog/flex-ac-mc/single-screw-duplex-connector/
http://www.aifittings.com/catalog/flex-ac-mc/single-screw-duplex-connector/
- Location
- New Jersey
- Occupation
- Journeyman Electrician (retired)
This is from the Topaz #350 spec sheet:
- Status