skeshesh
Senior Member
- Location
- Los Angeles, Ca
Good day everyone - hope all are having a good weekend.
I'm working on a small project replacing a pump and adding a backup (sizes TBD by mechanical engineer but about 30-40HP or so). The existing pump is fed from a westinghouse five star MCC. I'm not very familiar with that unit and was wondering about the right approach. Is it a good idea to find a westinghouse bucket from a warehouse? I measured the regular size bucket space to be around 12"H x 15.5"W. I'm wondering if the spaces can be field modified to fit a circuit breaker or if there's a circuit breaker that will fit that space. All advice is much appreciated.
I'm working on a small project replacing a pump and adding a backup (sizes TBD by mechanical engineer but about 30-40HP or so). The existing pump is fed from a westinghouse five star MCC. I'm not very familiar with that unit and was wondering about the right approach. Is it a good idea to find a westinghouse bucket from a warehouse? I measured the regular size bucket space to be around 12"H x 15.5"W. I'm wondering if the spaces can be field modified to fit a circuit breaker or if there's a circuit breaker that will fit that space. All advice is much appreciated.