Mechanical Challenge

[wireguru]

A german firm that owns a floor paneling company, locally, used this "x" structure (small detail) in their kendorf applications. They also had alot of assorted attachments that they used, (caddie comes to mind) the like attachments held in by a mushroom bolt and threaded to the plate as shown. It was tight and a very clear looking application.

these guys made a house out of the stuff http://www.tkithouse.com/

 

[weressl]

Having never been deterred from imparting my wisdom by not knowing what I was talking about ...

could you mount the detector down where you want it, and pump the emissions down to the sensor through some sort of tubing?

I believe EPA does not allow that. Otherwise this would be the best solution, even if you have to heat trace the sample tubing.

 

[petersonra]

I believe EPA does not allow that. Otherwise this would be the best solution, even if you have to heat trace the sample tubing.

One of our customers did this with EPA blessing. But the sample tubing did have to be heated and that was pricey. But there was no real option, as I can't think of a practical way to put a GC up on a smoke stack.