Medium Voltage Reference manual

Merry Christmas
Status
Not open for further replies.

stidwell

Member
I am a consulting engineer and most all of the designs I have done have been with 480V (low voltage). I am new to the realm of medium voltage design (2000V+) and was wondering if anyone knew of any good engineering reference manuals that were good for medium voltage design?

Any information would be greatly appreciated.

Thank you
 

Hameedulla-Ekhlas

Senior Member
Location
AFG
I am a consulting engineer and most all of the designs I have done have been with 480V (low voltage). I am new to the realm of medium voltage design (2000V+) and was wondering if anyone knew of any good engineering reference manuals that were good for medium voltage design?

Any information would be greatly appreciated.

Thank you

See these

http://www.nfpa.org/aboutthecodes/list_of_codes_and_standards.asp?cookie_test=1


Handbook of switchgears By Bhel

www.schneider.com.

http://www.schneider- electric.com/documents/panelbuilders/en/shared/technical-ressources/mv_design_guide.pdf
 
Status
Not open for further replies.
Top