I am trying to place an exterior utility meter on a building which has a 12" brick wainscot on the base of the building. Does anyknow know how to go about placing a meter on this type of building? I am trying to avoid using a sharp curved piece of conduit to rise from the underground service feed. Thanks!
Meter Placement on Building with Brick Wainscot
- Thread starter robgrant3
- Start date
- Status
LarryFine
Master Electrician Electric Contractor Richmond VA
- Location
- Henrico County, VA
- Occupation
- Electrical Contractor
Is that 12" up from the ground, or 12" out from the wall?
It seems you'd either have to offset to the meter, or bring the meter out to avoid an offset.
Or, mount the meter on the brick instead of above it.
It seems you'd either have to offset to the meter, or bring the meter out to avoid an offset.
Or, mount the meter on the brick instead of above it.
- Status