Methods for routing equipment back to UPS

Status
Not open for further replies.
B

bjp_ne_elec

Senior Member
Location
Southern NH
Have a telephone/computer room with a single UPS. It's a situation where the client is moving in to another building, and presently everything is stuffed in a corner and all corded back to the UPS. The client is moving in to new digs, and the telephone/computer room is much larger. Wants to put phone equipment on opposite side of room - opposite UPS and computers.

Like to hear creative thoughts about how to get phone equipment routed back to UPS. Don't even think running a cord back, say in a trough, is an option - code wise.

Thanks,

Brett
 
Brett,
Install a UPS that is designed to feed a panel, then hardwire from the panel to the loads just like a normal system.
Don
 
Status
Not open for further replies.
Top