Minor job

[Sberry]

Reworked the pump for this job, then this. Shorted winding. Wish I had 1 and a pump on the shelf.

 

[ptonsparky]

Reworked the pump for this job, thenView attachment 2566427 this. Shorted winding. Wish I had 1 and a pump on the shelf.

Let me check my good stuff inventory...






...Nope

 

[gadfly56]

Reworked the pump for this job, thenView attachment 2566427 this. Shorted winding. Wish I had 1 and a pump on the shelf.

Ehhhhhhh, a session with a little Scotchbrite and it'll be just fine.

 

[Joethemechanic]

This is what you need

 

[gadfly56]

This is what you need

I believe I've already watched that one. She has a few. My expertise in this area is limited; that is to say, zero. I'll wait with interest to see what more knowledgeable denizens here have to say.

 

[Joethemechanic]

I believe I've already watched that one. She has a few. My expertise in this area is limited; that is to say, zero. I'll wait with interest to see what more knowledgeable denizens here have to say.

Well there was no proper "Dip and Bake" she just brushed the varnish on. Hammer selection kinda sucked she was a bit rough on the end of the shaft and the bearings, but no worse than I've seen done out in the field here,

But it seems like she is working with very limited resources.