- Location
- Bremerton, Washington
- Occupation
- Master Electrician
I am helping my granddaughters family run a new circuit for a pond pump and lighting. Existing is 10-2 NM direct buried from a pump house, thru the crawl of the mobile, and on to the pond.
The service pedestal is close to the pond, I can come off of it with 1/2" PVC conduit, run along the skirting and then a short ditch to the pond.
In the service pedestal there is the 200 A main for the mobile, a 2P 30 and a 1P 15. The 2P 30 feeds an outside air conditioner, and the 1P 15 is a spare.
Can I change the 15A for a 20A? Its an Acorn pedestal, and the label is old and faded.
Thanks, I have not done a mobile for 30+ years.
The service pedestal is close to the pond, I can come off of it with 1/2" PVC conduit, run along the skirting and then a short ditch to the pond.
In the service pedestal there is the 200 A main for the mobile, a 2P 30 and a 1P 15. The 2P 30 feeds an outside air conditioner, and the 1P 15 is a spare.
Can I change the 15A for a 20A? Its an Acorn pedestal, and the label is old and faded.
Thanks, I have not done a mobile for 30+ years.
