Monday Photos (Spot the Violations)

[e57]

Wicked sweet.


I read that and I knew it had to be a New Englander.

And you'd know what part if he wrote wicked pissa.

On topic - this was all ONE panel - so 4 grounds - one at each panel cover screw????

 

[zappy]

The use of the screw holding tabs for EGC termination is ingenuity at its finest. :roll: :wink:

They didn't scrap the paint away,what a hack!

 

[e57]

They didn't scrap the paint away,what a hack!

Well the screw cuts into both wire and can - right?

 

[quogueelectric]

Wicked sweet.


I read that and I knew it had to be a New Englander.

Witchcraft I tell ya.

 

[480sparky]

And you'd know what part if he wrote wicked pissa.

On topic - this was all ONE panel - so 4 grounds - one at each panel cover screw????

Yep. The four SqD HO breakers were added because someone added 4 circuits. They couldn't see any extra neutral/ground terminals, so a ground wire got stuck under each cover screw.

 

[Billy_Bob]

So that's why panel covers have so many screws holding them down!

The more screws on the panel cover, the more additional ground terminals you will have! (They should have purchased a 6 screw panel.)