Multi family inter system bond

[MelSanders]

We are wiring an 8 unit town home building. The service ( disconnect, and meter stacks) is located at one end of the building. We have conduit ran to an exterior j box for the feeders. Next to that box we are stubbing out Cat 6 and RG 6 from the media panel.There is micro duct ran to that location for the low voltage service. What are my requirements for the inter system bond for this scenario? I am in Washington state.

 

[ptonsparky]

I would be putting it, singular, at ‘one end of the building’ near the service disconnect. Note I am in Nebraska.

 

[ptonsparky]

IDR if I’ve ever seen one used.

 

[Eddie702]

I would put it outside connected to the GEC.