Multiple sets on 400a switch

[mstrlucky74]

Guys have 5 sets of 4/0 being fed from a 400a fused switch. Unusual to say the least. What would have to be done in order to terminate all these sets at the switch? Thx

Sent from my SM-G955U using Tapatalk

 

[GoldDigger]

Possibly run all wires of one phase to a large Polaris connector with a single wire to the corresponding device lug. This may work if the multiple sets are for voltage drop purposes and you can get a single wire or two wires to carry the current.

Or you may be able to find a multiple conductor lug that fits the device terminals.

Sent from my XT1585 using Tapatalk

 

[mstrlucky74]

Possibly run all wires of one phase to a large Polaris connector with a single wire to the corresponding device lug. This may work if the multiple sets are for voltage drop purposes and you can get a single wire or two wires to carry the current.

Or you may be able to find a multiple conductor lug that fits the device terminals.

Sent from my XT1585 using Tapatalk

Thanks

Sent from my SM-G955U using Tapatalk

 

[nickelec]

Probably could use one of these

Sent from my SM-G950U using Tapatalk