NEC 110.3(B) Interpetation

Status
Not open for further replies.
W

wkite

New member
I have a question, if we have a piece of equipment that came in with a name plate indicating 230 VAC. We want to feed it with 208 VAC. Our problem is that the equipment has a diagram indicating that it can be wired from 180 to 240 VAC providing we change the internal wiring as needed. Can we leagaly do this according to 110.3(B)?
 
Re: NEC 110.3(B) Interpetation

Yes, the listing and labeling instructions are not violated. It is possible a manufacturer's instruction is violated if it is not connected per their diagrams.
 
Re: NEC 110.3(B) Interpetation

The manfacturers instruction are part of the listing and labeling. Follow them.
 
Status
Not open for further replies.
Top