NEC handbook

jon176

Member
Location
Illinois
Occupation
IBEW journeyman wireman
I have never owned a handbook. It appears there is a combination book with the NEC and handbook? Or do I need to purchase two separate books? Thanks, and Merry Christmas
 
No the NECH is the full codebook with added commentary, photos, and graphics. Personally I own many of them and find them useful. Just for the record the commentary is the opinion of the authors but in my experience it is very accurate. Similar to the way Mike Holt writes commentary for his books.
 
No the NECH is the full codebook with added commentary, photos, and graphics. Personally I own many of them and find them useful. Just for the record the commentary is the opinion of the authors but in my experience it is very accurate. Similar to the way Mike Holt writes commentary for his books.

I’ve never owned a handbook but I’ve had a subscription to NFPA Link for a while and I believe the enhanced content at the bottom of the section is from the handbook I believe and the enhanced content can help clear up can help clear questions you may have about a code rule . I really don’t open it too often but it’s helped when I’ve needed it


Sent from my iPhone using Tapatalk
 
LinK is the paid subscription to the NEC and includes most of the other NFPA publications, as well as multiple editions for many of the NFPA pubublications.

I love the nec is available all the way back to 2008 . I have every edition of nec back to 2008 and 2024 NFPA 70 E saved to my favorites so they all pop up as soon as I log in . I love Link


Sent from my iPhone using Tapatalk
 
Last edited:
I love the nec is available all the way back to 2008 . I have every edition of nec back to 2008 and 2024 NFPA 70 E saved to my favorites so they all pop up as soon as I log in . I love Link


Sent from my iPhone using Tapatalk
I have a 1962 NEC. It is about 4 inches wide and 6 3/8 inches long and 448 pages, including the Index.
It's an NFBU National Electrical Code.
It is "craft" paper, brown in color. It is in good condition.
Because of its size, it would be a perfect fit in an electricians rear pocket of his bib overalls.

TX+MASTER#4544
 
I have a 1962 NEC. It is about 4 inches wide and 6 3/8 inches long and 448 pages, including the Index.
It's an NFBU National Electrical Code.
It is "craft" paper, brown in color. It is in good condition.
Because of its size, it would be a perfect fit in an electricians rear pocket of his bib overalls.

TX+MASTER#4544

448 pages ! Simpler times lol


Sent from my iPhone using Tapatalk
 
Thanks, Jaybone812 Senior Member
Don't Mess with Texas
Welcome to Texas.
Where we tip our hats to the ladies,,,,,,and the Rose of San An-tone......(lyrics)
(San Antonio, Texas)
 
I have a 1962 NEC. It is about 4 inches wide and 6 3/8 inches long and 448 pages, including the Index.
It's an NFBU National Electrical Code.
It is "craft" paper, brown in color. It is in good condition.
Because of its size, it would be a perfect fit in an electricians rear pocket of his bib overalls.

TX+MASTER#4544
Prob less than 150 pages if printed the same dimensions of 2023 nec
 
Personally I prefer the NFPA Link. It gives both Code and handbook references in one and access to all the other NFPA codes. I've had the handbook in the past and it doesn't give the entire code language. Costs end up less than buying both or even one over the typical code cycle and access to past code cycles.
 
I've had the handbook in the past and it doesn't give the entire code language.
I don't believe that is true. From the NFPA:
The NFPA 70®,  National Electrical Code® (NEC®) Handbook, is the most practical and powerful resource today for electrical design and installation. You get the complete text of the latest NEC plus a range of features providing insights and guidance on its application.
 
At one time there were several publishers of code handbooks.
Yes, and I much preferred the older McGraw-Hill versions, edited by Joe McPartland to NFPA version, even though the full code text is only found in the NFPA one. However have not bought a handbook in a very long time.
 
I believe the McPartland version was the Electricians Handbook not the NECH.
No, Joe McPartland was the editor of the McGraw Hill NEC handbook for at least the 1978, 1981, and 1984 versions as I have copies of those on my book shelf. My 11th edition of the Electricians handbook was edited by Croft and Summers.
 
Top