Need your guys help on this one

[SKS]

Here is what's going on,

I have existing 240v 3ph outlet and I think its a L15 cord running to a batch oven and small fan. (3 hots, 1 ground)

Come to find out the batch oven was made at 240v 1ph ( 2 hots, 1 neutral 1 ground)

Looking for a way to run this batch oven and small fan motor on the existing 3ph circuit if possible. Was told oven is 13 amps, small fan shows 1/20hp.

Is there a step down or converter that would do this will out breaking the bank? Do I basically need to create a neutral? Everything I am researching is 240 1ph to 3ph. I need to go the other way and get a neutral, trying to get this done like 2 weeks ago. This is for my shop not a customer job.




Thanks
Wayne

 

[Dennis Alwon]

I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.


If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the

button at the bottom left corner of the post.