socalelect
Member
- Location
- so. cal
in a 120v ckt the neutral compleats the ckt correct? so if thats the case wouldnt the neutral show roughly the same about of current as the ungrounded conductor feeding the ckt ?
heres my example several 120v circuits from a 120/240V single phase service i was doing some troubleshooting for another issue
so i amp clamped everything L1 had approx. 6 amp load L2 had aprox 5.5 amp load the loads on these are very very small elec motors shouldnt the neutral be carrying back approx some where around the sum of the L1 & L2 amperage ? :?:?
heres my example several 120v circuits from a 120/240V single phase service i was doing some troubleshooting for another issue
so i amp clamped everything L1 had approx. 6 amp load L2 had aprox 5.5 amp load the loads on these are very very small elec motors shouldnt the neutral be carrying back approx some where around the sum of the L1 & L2 amperage ? :?:?