New boat dock wiring

[nickelec]

Good afternoon all. I have to look at a project for a friend of mine. It's a dock with 7 pedestals . The current set up has a transformer/panel in one mounted on the dock .

All the wiring was vandalized and stolen PVC conduit is remaining.

The scope is to replace 7 pedestals using existing transformer and panel. Besides all pedestals and outlets needing GFCI protection is there anything I should look for specifically.

I know when it comes to docks and water grounding/bonding is very important. I've never done one before so anyone with some insight or even product recommendations would be great. This is in South Florida if that helps. Thanks

Sent from my SM-S906U using Tapatalk

 

[Rick 0920]

Other than what you have stated already, I use PVC and PVC click straps and stainless screws. Don't forget your expansion couplings if you want the conduit to stay together. I use PVC boxes with external hubs and Carflex where I need flexibility. A PVC box heater comes in real handy for doing docks also.