nuetral and ground connected on same bus bar

[bizarre330]

Working on a house with a junction box that has neutrals and ground connected on the same bus bar. would a correct fix be to install a new bar just for the neutral or wire them all together to have them separate from the ground

 

[augie47]

[FONT=&quot]I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.


If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the

button at the top right corner of the post.[/FONT]