OK, what am I missing here..
- Thread starter Hv&Lv
- Start date
letgomywago
Senior Member
- Location
- Washington state and Oregon coast
- Occupation
- residential electrician
Do you have a 3 wire cord and outlet?
LarryFine
Master Electrician Electric Contractor Richmond VA
- Location
- Henrico County, VA
- Occupation
- Electrical Contractor
One end of the jumper is permanently attached to the neutral terminal.
For 3-wire use, the other end connects to the green screw on the cabinet.
For 4-wire use, it connects back to the neutral just so it's not hanging loose.
For 3-wire use, the other end connects to the green screw on the cabinet.
For 4-wire use, it connects back to the neutral just so it's not hanging loose.
There we go. That's what I was missing