Working on the kitchen of a 1880 house. The original plaster ceiling was 9-feet. A newer drywall ceiling was built with 2X4s and perpendicular 1X3 strapping, both 16" OC, about a foot below the old ceiling. This leaves about 8 inches between the 2X4s and the old ceiling - plenty of room to run romex between the new recessed lights and three-way switches.
Bwtween the fixtures, I intend to clamp to the 2X4 near the first fixture, pull the romex taut over two or three 2X4s, then clamp to the 2X4 near the next fixture. Any code problems with that?
Many thanks for your help.
Bwtween the fixtures, I intend to clamp to the 2X4 near the first fixture, pull the romex taut over two or three 2X4s, then clamp to the 2X4 near the next fixture. Any code problems with that?
Many thanks for your help.