OUTLETS AND SWITCHES FOR ROMEX

Status
Not open for further replies.
A

a-1 elec

Member
I HAVE A SINGLE POLE SWITCH THAT HAS A REMOVABLE BACK COVER FOR ROMEX. THE HOUSE IT CAME OUT OF HAS NO ELECTRICAL BOXES IN THE WALL. THE DEVICES HAVE WINGS ON THE BACK TO SECURE TO THE WALL. IT HAS A P-S LOGO ON IT BUT IS IS NOT MADE BY PASS AND SEYMORE. ANY HELP THANKS JOHN
 
Re: OUTLETS AND SWITCHES FOR ROMEX

You might take the 'Caps Lock' key off so you are not shouting at us.

Are you asking a question?
 
Re: OUTLETS AND SWITCHES FOR ROMEX

sorry charlie, didnt mean to shout! yes it is a question. i need to locate these devices . some need to be replaced. charlie what are you doing these days ?
 
Re: OUTLETS AND SWITCHES FOR ROMEX

I supervise a small engineering section for the Indianapolis Power & Light Company, represent the EEI on CMP-10 (Articles 240 and 780), and teach some seminars for the Indiana Electric League.
 
Re: OUTLETS AND SWITCHES FOR ROMEX

There common in trailers, so look for a trailer supply shop and you should find them there. also you could just use a cut in box (old work) and just install regular switch's
 
Re: OUTLETS AND SWITCHES FOR ROMEX

John,
I had a service call at a mobile home with loose outlets, I found the same thing you did. I removed the outlet, and there was some slack in the wire. I cut in a gem box and ran the romex into that. Then I just put in a regular receptical in. Worked great.
Eric
 
Status
Not open for further replies.
Top