jrfbuildit
Member
- Location
- Chester County, Penna.
I am a general contractor in PA and I unfortunatley got "roped in" to installing baths and kitchens for one of the big "box stores". My issue is I pulled a permit and drew an electrical diagram for heated flooring (at the request of the TWP), the permit was approved including approval of the electrical drawing (which had to be stamped by an electrical inspector). The "box store" did not like my time frame to execute the job and wants to have another contractor to install the bathroom using my drawing. Is there the possiblility of liability or future lawsuit if my drawing is used? What if he hires a different inspector than mine could this cause "finger pointing" in the future if something did go wrong. Just trying to cover myself.
Any help/advice would be appreciated.
P.S. My lawyer didn't know of any liability but his advice was withdraw the permit altogether because my name is associated on the drawing plus he thinks I should withdraw so they don't reap the benefits of my work to pull the permit.
Thanks in advance.
Any help/advice would be appreciated.
P.S. My lawyer didn't know of any liability but his advice was withdraw the permit altogether because my name is associated on the drawing plus he thinks I should withdraw so they don't reap the benefits of my work to pull the permit.
Thanks in advance.