PEX - In My Way

[DBoone]

I’m in the process of building a new home for me and my family. Plumbers finished their top-out last week and now I’m beginning the electrical rough-in.

In the master bath is a toilet room and running dead center through the joists are two PEX lines. I can’t center up my light/vent.

Any good ideas on a solution?

 

[masterinbama]

Get the plumber back

Sent from my LML211BL using Tapatalk

 

[Chamuit]

Do it now so you don't regret it later.

 

[DBoone]

Just did it. Thursday they should be moved.

 

[LarryFine]

I had a customer who paid me to re-route a 4" PVC drain line to make room for a large Panasonic exhaust fan.

I simply used two pairs of 45s to zig-zag into the next joist bay and back. Plumbing is much easier than wiring.

 

[GoldDigger]

I had a customer who paid me to re-route a 4" PVC drain line to make room for a large Panasonic exhaust fan.

I simply used two pairs of 45s to zig-zag into the next joist bay and back. Plumbing is much easier than wiring.

Cutting through the joists in the process?

Sent from my Pixel 4a using Tapatalk

 

[LarryFine]

Cutting through the joists in the process?

Absolutely. I-joists, within middle third vertically and horizontally, and in a span between two supporting interior walls.