Is it o.k. to phase ungrounded conductors that are smaller than 6AWG to the color you need or do I need to pull the correct color. I have looked in the code book but can only find information on the grounded conductor. Thank you for your help.
The only required "continuous" color is covered in 200.6 and 250.119.
Other identification is covered by 210.5 and 110.15.
You may tag or tape the phase conductors where required to identify them,
The only required "continuous" color is covered in 200.6 and 250.119.
Other identification is covered by 210.5 and 110.15.
You may tag or tape the phase conductors where required to identify them,
