Phase taping wires different colors.

[zappy]

4awg and over, you can phase tape a black wire white. Correct? Are there any other rules for phase taping a colored wire, a different color? Thank you for your help.

 

[augie47]

A few: 110.15, 200.6, 210.5 & 250.119 are some.

 

[jumper]

See 200.6(B) and 250.119(A)

 

[jumper]

Gus said it.

 

[kwired]

4awg and over, you can phase tape a black wire white. Correct? Are there any other rules for phase taping a colored wire, a different color? Thank you for your help.

You are looking at it the wrong way. How about this:

Under 4 AWG the grounded or grounding conductors must have insulation that is appropriate color the entire lenght of the conductor. 4 AWG and over could be any color but are allowed to be re-identified at the terminations.

 

[sameguy]

How about this: White/gray, green, high leg orange, are the only colors needed to be ided., use 1,2,3, for phase or no identification.

 

[infinity]

4 AWG and over could be any color but are allowed to be re-identified at the terminations.

Are you saying that I can use all white conductors and re-identify them black, red, blue if they're larger than #6?

 

[kwired]

Are you saying that I can use all white conductors and re-identify them black, red, blue if they're larger than #6?

Can't say I have ever seen or done that but do you see anything that says you couldn't.

 

[don_resqcapt19]

Can't say I have ever seen or done that but do you see anything that says you couldn't.

See 200.7

 

[kwired]

Are you saying that I can use all white conductors and re-identify them black, red, blue if they're larger than #6?

OK you can do this with any color except white, gray, or green.

Green is not allowed per 250.119.