We are surface mounting 5 - 4' light fixtures in a row roughly 5' apart, with emt between the fixtures.
Do we have to install a junction on each end of the light fixture or can we just pipe between fixtures themselves.
We are split on the correct installation, the NYC office building currently has this type of installation
done in both of these methods. Looking for some clarification in the code.
Do we have to install a junction on each end of the light fixture or can we just pipe between fixtures themselves.
We are split on the correct installation, the NYC office building currently has this type of installation
done in both of these methods. Looking for some clarification in the code.
