Pool Heat Exchanger

[infinity]

How would one bond this heat exchanger for a commercial pool? There is no lug on the unit and most of the external components are powder coated. My thought was to put a pipe clamp on the stainless steel nipple that transitions to the plastic pipe. The copper piping is the feed from the boiler.

 

[brantmacga]

There’s nothing electrical going on inside that exchanger we can’t see from the pic, right ? From a bonding safety standpoint I don’t think you are required to bond the exchanger.


Sent from my iPhone using Tapatalk

 

[SSDriver]

We usually just bond the boiler that is feeding the heat exchanger. I have never had to bond the plate exchangers before.