Posting totals

Status
Not open for further replies.

roger

Moderator
Staff member
Location
Fl
Occupation
Retired Electrician
George, that wasn't cheating. :wink:

Roger
 

George Stolz

Moderator
Staff member
Location
Windsor, CO NEC: 2017
Occupation
Service Manager
Did you know you can only manipulate 400 posts at a time? ;)

(Last night I made two threads in the relocation forum, and copied bogus posts back and forth between them until I had 1076 posts in the thread. Now that I have it soft deleted I can turn it off and on with a flick of the switch. :D )
 

roger

Moderator
Staff member
Location
Fl
Occupation
Retired Electrician
Did you know you can only manipulate 400 posts at a time? ;)

(Last night I made two threads in the relocation forum, and copied bogus posts back and forth between them until I had 1076 posts in the thread. Now that I have it soft deleted I can turn it off and on with a flick of the switch. :D )

So IOW's you were posting short posts one after another, what a concept. :D

Roger
 

peter d

Senior Member
Location
New England
(Last night I made two threads in the relocation forum, and copied bogus posts back and forth between them until I had 1076 posts in the thread. Now that I have it soft deleted I can turn it off and on with a flick of the switch. :D )

I don't suppose I could jump into the relocation forum for a few hours? ;) :D
 

glene77is

Senior Member
Location
Memphis, TN
George,

From the moderators section, tell me where is this block of info:
""“moderated” threads or posts""

I am trying to track what moderators actually do.
to see if I might be useful.

It is also a compulsive thing, analyzing functional methods.
That and spelling long wirds correctly are my talents,
or as my wife says "your only vices!".

...
 

roger

Moderator
Staff member
Location
Fl
Occupation
Retired Electrician
George,

From the moderators section, tell me where is this block of info:
""?moderated? threads or posts""

I am trying to track what moderators actually do.
to see if I might be useful.

It is also a compulsive thing, analyzing functional methods.
That and spelling long wirds correctly are my talents,
or as my wife says "your only vices!".

...

There are areas that can only be accessed by Moderators and the Webmaster.

Roger
 

glene77is

Senior Member
Location
Memphis, TN
Larry,
I am reminded of the first time I used Oracle, in 1984, on an IBM-AT!
I found that there was a 32K buffer for blocks of scripting.
That even surprised the software engineers, so they spread the word.
Some one had failed to document their work, and left this surprise.

Anyway, and in continued jest,
is there some limit to the "Posting Counter",
such that it might roll over to "Zero" after 12K ?

A cure for such a situation would be to sign in as "Larry Fine #2"
before you hit the "Max Count" ,
and then continue to post your good commnts.

IOW, I appeciate your electrical comments,
and hope you keep them coming in the HAPPY NEW YEAR!
 
Status
Not open for further replies.
Top