Power Outlet panels.

Status
Not open for further replies.
W

wmeek

Senior Member
Location
Texas
Occupation
Electrician
I was wanting to know if you install a Power Outlet Panel for a Pull behind trailer, are you required to have a Main Breaker. My Situation calls for a 50A 120/240v, 30A 115/125v, and a 20A duplex GFI protected. What size feeder is needed. There is never a need for both the 50A and 30A to be used at same time.
 
Re: Power Outlet panels.

I was wanting to know about the service end of this project.I am figuring on setting a POP on site, with a 120/240V 50A Rec.,115/125V 30A Rec., and a 20a gfci rec. I am planning to feed it with a 60A feed. The 30A and 50A will not be used at same time. Its there if there are different setups as for voltage and amperage. Does anyone see any problems with this configuration.

Thanks
 
Status
Not open for further replies.
Top