QUADLOGIC WIRING

[Alwayslearningelec]

What size/type of wire is usually run from ct's in a panel to a quadlogic meter? THanks

 

[Alwayslearningelec]

I know I shot myself in the foot again. I actually tried to attach this earlier but it was too big..I should I have just posted link in the first place. Is it power wiring(600v)? Thanks.

http://www.quadlogic.com/product_images_diagrams/MC5c/us/3P4W_WYE.html

 

[mike7330]

I have wire some of these meters, I have used 14awg for the ct's, But I believe you can go smaller, You should call them and they will let you know.
The biggest problem I've seen on these meters is no fused/breaker disconnect on the voltage feed to the meter,(installer just taping on to line side of the main breaker/lugs) If you need their phone number let me know and I'll post the number

 

[Alwayslearningelec]

Quadlogic said they actually provide the 6' leads the run from the ct's to the quadlogic cabinet. We just tap the line voltage feeders to be run to feed the meter.