Repairing a PC. PSU : id Components

[jazmynesteuber]

Hi

I am having an attempt at repairing a Computer 600W PSU, a sort of exercise to see if I can.
First is I am trying to id as many the components on the board as possible before I start to test , not really sure which ones would be best to test first , as I would have to de-solder each one to test , or could I test any that are attached ! .
Anyway some are fairly easy to id, but some not so, to start there is a, what looks like a resistor of some sort, the markings from what I can see are “5° C V1” it is sleeved ! , underneath on the PCB one of the pins is marked “Ropp” !

 

[charlie b]

I am closing this thread in accordance with forum rules. This forum is intended for use by electricians and electrical contractors, inspectors, engineers, and vendors with their job-related duties. We are not allowed to provide how-to advice to persons who are not employed in this industry, or persons who do not perform electrical installation or maintenance as part of their jobs.

Also, this forum is concerned with electrical installations, not computer hardware.