Retrofit LED luninare

[tom baker]

Any comments on this retrofit style LED luminare? Drill a hole, fish the wire, connect to LED driver J box. Insert LED lamp. Good for 2x6 ceiling joists. About $25.00. This one is from Home Depot.

Will upload photo later

 

[Hv&Lv]

I’ve used them in closet installs.
lots of light and easy enough.

 

[MAC702]

No need to try to upload a photo if you just link to the product on their website. I still can't picture exactly what you are doing. This is the results page at Home Depot for your exact terms:

https://www.homedepot.com/s/retrofit%20style%20LED%20luminare?NCNI-5

 

[kwired]

Any comments on this retrofit style LED luminare? Drill a hole, fish the wire, connect to LED driver J box. Insert LED lamp. Good for 2x6 ceiling joists. About $25.00. This one is from Home Depot.

Will upload photo later

There are some that don't even the 2x6 joist clearance, need room for the driver box but other than that can have joist centered on the hole and it still works. What I have been using instead of conventional cans, even on new construction. Doesn't cost any more than a conventional can plus an LED trim does.

 

[tom baker]

its very similar to this LED
Topaz 4" recessed LED.

 

[Knuckle Dragger]

Any comments on this retrofit style LED luminare? Drill a hole, fish the wire, connect to LED driver J box. Insert LED lamp. Good for 2x6 ceiling joists. About $25.00. This one is from Home Depot.

Will upload photo later

I was skeptical at first. That type is my go to recessed now.
I like the style with the three baffle ring on the trim they are a little deeper though.