T Tim B. Member Location Spokane Wa Nov 2, 2020 #1 Based on the plug in the picture. Do I need to run 2 legs of 120 v and a ground or 1 leg of 240 a neutral and a ground? Attachments IMG_0755.jpg 229.4 KB · Views: 27
Based on the plug in the picture. Do I need to run 2 legs of 120 v and a ground or 1 leg of 240 a neutral and a ground?
480sparky Senior Member Location Iowegia Nov 2, 2020 #2 I'd be more concerned with the 10 amp limit of that plug. Does the device this goes to have a 10a max? If so, look hard at the circuit that's going to supply it.
I'd be more concerned with the 10 amp limit of that plug. Does the device this goes to have a 10a max? If so, look hard at the circuit that's going to supply it.
Little Bill Moderator Staff member Location Tennessee NEC:2017 Occupation Semi-Retired Electrician Nov 2, 2020 #3 @Tim B. What is your occupation?
N norcal Senior Member Nov 2, 2020 #4 That plug looks like a Australian or New Zealand type, not going to answer further due to rules here.
That plug looks like a Australian or New Zealand type, not going to answer further due to rules here.
Little Bill Moderator Staff member Location Tennessee NEC:2017 Occupation Semi-Retired Electrician Nov 2, 2020 #5 @Tim B. Send me a PM (start a conversation) with your occupation. I will reopen this once I receive it.
@Tim B. Send me a PM (start a conversation) with your occupation. I will reopen this once I receive it.