sparky90
Member
SE or SER cable. I have a cutomer that in the past some one ran about 85' ft of SE/SER cable on the roof from a junction box. They laid it right on a commercial shopping center roof, where their are plenty of roof top HVAC units and exhauust fans that need service, with no supports right to a point where the roof levels change and it pokes thru and goes into tennant space. The exterior jacket is now open/disintegrated and the conducters(XHHW insulation) are exposed. Was quoting t 110.11 and 110.12, but was wondering if I can apply table 225.61 to this as well. Any suggestions would be appreciated
