Can anyone tell me where to reference seismic requirements for new bus duct being placed throughout an existing building. We are in New Jersey upgrading an existing switch to new gensets with new bus duct running from the 7th fl. through the building and down to new basement House Service Boards. Looking to be pro-active as to any requirements we may fall under. Thanks
seizmic constraints
- Thread starter njjoe
- Start date
- Status
bphgravity
Senior Member
- Location
- Florida
Re: seizmic constraints
The project specifications should identify the seismic zone the building is in. Once you determine that, the building code will provide you with installation requirements.
The project specifications should identify the seismic zone the building is in. Once you determine that, the building code will provide you with installation requirements.
Re: seizmic constraints
public law 95-124 is a starting point. It is part of the earthquake hazards reduction act.
Your AHJ should be able to tell you what codes are applicable in your area.
I've installed a fair amount of seismic bracing, and I can tell you that it is worth the money.
public law 95-124 is a starting point. It is part of the earthquake hazards reduction act.
Your AHJ should be able to tell you what codes are applicable in your area.
I've installed a fair amount of seismic bracing, and I can tell you that it is worth the money.
petersonra
Senior Member
- Location
- Northern illinois
- Occupation
- engineer
Re: seizmic constraints
is NJ in an earthquake zone?
is NJ in an earthquake zone?
ron
Senior Member
- Location
- New York, 40.7514,-73.9925
Re: seizmic constraints
Some areas of NJ are Zone 2A, but you need to find out specifically from a local structural engineer.
Some areas of NJ are Zone 2A, but you need to find out specifically from a local structural engineer.
- Status