Series Rated Equiptment

[mrswib]

I do not understand what they are trying to describe in the second part of 110.22. Can you give me an Example and Description.

 

[ron]

Re: Series Rated Equiptment

The second paragraph of that article describes labeling.
It is important, that once a series rated combination is installed, that no one should "willy nilly" replace the fuse or breaker with another model that may not be a series rated combination.

[ October 14, 2003, 12:16 PM: Message edited by: ron ]

 

[jerryb]

Re: Series Rated Equiptment

The key point here is "If" a "series" rating is used on the distribution system then it needs to be identified. If it is a standard, "Fully rated" system then no special identification is required.

 

[caj1962]

Re: Series Rated Equiptment

mrswib
Are we by any chance doing your homework. I see 5 posts from you today that all look vaguley fammilar. Like from the delmar series of electrical books.

 

[ron]

Re: Series Rated Equiptment

For information about what series ratings are, check the following site for one version.
http://www.bussmann.com/apen/pubs/series.asp

 

[charlie]

Re: Series Rated Equiptment

I think this is a test question so I am locking this post. I will remove the lock if I am wrong.