H heinny Member Feb 9, 2011 #1 does the code allow LFNC-C to be used for service entrance cables? It would be more than 1.8m in length.
does the code allow LFNC-C to be used for service entrance cables? It would be more than 1.8m in length.
augie47 Moderator Staff member Location Tennessee Occupation State Electrical Inspector (Retired) Feb 9, 2011 #2 Rather than tell you "yes" or "no", let me refer you to 230.43 so you will know where to find the answer to any service raceway question.
Rather than tell you "yes" or "no", let me refer you to 230.43 so you will know where to find the answer to any service raceway question.
G Gaffen99 Senior Member Location new jersey Nov 8, 2011 #3 If the box is behind the meter, and the panel is 26" above the box, what's the height on the meter?
J John120/240 Senior Member Location Olathe, Kansas Nov 8, 2011 #4 Gaffen please see Little Bill's response above. Start a new thread as it gets confusing to respond to unrelated questions in one thread. Thank You
Gaffen please see Little Bill's response above. Start a new thread as it gets confusing to respond to unrelated questions in one thread. Thank You