Service Equipment

[KP2]

I was hoping somebody would have an idea of what this service equipment may cost. It is a picture of a 1200 amp service. one 600 amp main is for the boiler, the other 600 amp main feeds 4 stores. This is the first time I have attached a picture, I hope it works.

P.S. This is for a class project I'm working on with my students so a ball park or an opion will be great.
Thanks
Kevin

 

[bradleyelectric]

why don't you just fax it to a supply house with the info, but include the size of the tenant breakers also.

 

[KP2]

We tried, the supply house our school works with didn't come back with a price. They did three pages of pipe, wire, boxes, elbows, ect... I guess they didn't want to put any more work into it cause it is just a project for lab.

 

[bradleyelectric]

We tried, the supply house our school works with didn't come back with a price. They did three pages of pipe, wire, boxes, elbows, ect... I guess they didn't want to put any more work into it cause it is just a project for lab.

Did you call them and tell them you still need the service equipment price? Did you provide the sizes of the tenant breakers? Can you call and fax it to another supplier? Can it be done by using a 600A disconnect for the boiler and a 600A disconnect feeding a trough that feeds the other breakers? Want to pretend it costs $2500.?

 

[nunu161]

its definatly gonna cost more then 2500, i'd say about 10000

 

[KP2]

Yes we asked again, I guess they felt it wasn't worth putting in the time to get a price. The tenant loads are three 200 amp and four 100 amp disconnects. 208Y/120. And the supplier had all the info.