michaelstanley
Member
- Location
- Florida
400amp 3ph lateral to K-meter, k-meter to service rated auto transfer switch mounted side by side. Switch to gen for aux power. and switch to interior panels, (2) each with 200 amp mains, located immmediately behind exterior service conduit all under slab so as not to penetrate exterior wall. No engineer on this job and I do not do many with aux power. Any input concerning things to check or do in this case would be appreciated. Thanks much, Michael
[ May 28, 2005, 08:46 AM: Message edited by: michaelstanley ]
[ May 28, 2005, 08:46 AM: Message edited by: michaelstanley ]