service risers in florida does fpl have certain requirments

[brett711]

my boss told me that fpl reqiures for roof top penetration that you must use a min of 1 1/2

job i was on a nice riser at 1 1/4 just upgraded service to same amperage.
conduit fill was fine.

 

[John120/240]

Iv'e said it before, the telephone is your friend. Place a call to your POCO. Might check POCO's web site most have a page about

service requirements. Thirdly drive to POCO's office & ask in person.

 

[A/A Fuel GTX]

In my area, the minimum size raceway for service risers is 2" rigid regardless of service size.

 

[masterinbama]

In my area, the minimum size raceway for service risers is 2" rigid regardless of service size.

Here it's 2.5" GRS if it's use for the drop attachment.

 

[cpinetree]

FPL Standards link

FPL Standards link

http://www.google.com/url?sa=t&rct=j&q=fpl%20service%20and%20meter%20connections&source=web&cd=3&ved=0CDwQFjAC&url=http%3A%2F%2Fwww.fpl.com%2Fdoingbusiness%2Fbuilder%2Fpdf%2FEss4SvcMtrConnect.pdf&ei=9uAcUcKuHpSE9gT7ooHwCg&usg=AFQjCNHrfLRESYwUWXewlZfMv3C7ZWQhjA&cad=rja

Section IV: 11 of 24 #3 -> states 2' or larger (I am sure this is a misprint and should be 2" or larger), I also looked in a 2009 version I have and it has the same misprint.

Like others have said your best bet is to call FPL, We have built well services using 1" rigid (60amp), so depending on your circumstances you may be fine.

 

[A/A Fuel GTX]

Here it's 2.5" GRS if it's use for the drop attachment.

Wow.......That's a stout requirement.