Sparky 777
New User
- Location
- Monterey, CA
- Occupation
- DIY
Hi, there!
Replacing my old sub panel and finding that the sheathing on the conductors will fall about 1" short of the bottom of the panel if circuits coming in at the top show proper sheathing and same goes at the top if I properly connect circuits at the bottom of the panel.
My question is whether I can use Scotch Super 33+ or 88 to make up that inch of sheathing and still be OK with 2020 NEC. I don't know if Article 334.40(B) would apply here.
Thanks!
Replacing my old sub panel and finding that the sheathing on the conductors will fall about 1" short of the bottom of the panel if circuits coming in at the top show proper sheathing and same goes at the top if I properly connect circuits at the bottom of the panel.
My question is whether I can use Scotch Super 33+ or 88 to make up that inch of sheathing and still be OK with 2020 NEC. I don't know if Article 334.40(B) would apply here.
Thanks!