Shop Subpanel

Status
Not open for further replies.

Barnes515

New member
Location
Atlanta, Georgia
I have done some searching and cannot find an answer to my question. I don’t see anything in my books that tells me the answer as well. I’ve had a long day maybe I’m over thinking.Basically i am adding a sub panel to a shop that my dad is building. 200 amp main in house, 100 amp subpanel with main breaker in shop. What size breaker do i feed my wire from in the main panel to 100amp subpanel? 100amp breaker? Or whatever will fit the #1al?
 
Sounds like you need a little more experience before you tackle a job like this on your own. You might ask your Journeyman to help you.

With that said....

I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.


If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the
report-40b.png
button at the bottom left corner of the post.
 
Status
Not open for further replies.
Top